Electrical Engineering and Computer Science

Defense Event

Feedback Control Design for MARLO, a 3D-Bipedal Robot

Alireza Ramezani

 
Thursday, September 12, 2013
10:00am - 12:00pm
3316 EECS

Add to Google Calendar

About the Event

This work develops feedback controllers for bipedal walking in 3D on level ground, both in simulation and experimentally. MARLO is a new robot that has been designed for the study of 3D-bipedal locomotion, with the aim of combining energy efficiency, speed, and robustness with respect to natural terrain variations in a single platform. The robot is highly underactuated, having six actuators and, in single support, 13 degrees of freedom. Its sagittal plane dynamics are designed to embody the spring loaded inverted pendulum (SLIP), which has been shown to provide a dynamic model of the body center of mass during steady running gaits in a wide diversity of terrestrial animals. A detailed dynamic model is used to optimize walking gaits with respect to the cost of mechanical transport (cmt), a dimensionless measure of energetic efficiency. A feedback controller is designed that balances the robot during the quiet standing mode, and another feedback policy is developed such that the robot can take a transition step from quiet standing to walking. A feedback controller is designed that stabilizes steady-state 3D walking gaits, despite the high degree of underactuation of the robot. These controllers are combined through a state machine that handles switching among the three controllers. In experiments on planarized (2D) and untethered (3D) versions of the robot with point feet and passive feet (prosthetic feet) walking over flat ground or on a ramp with a shallow slope, the adaptability of the designed controller to the environment (planar or untethered, flat ground or ramp), and to the morphology of the robot (point feet or passive feet), is demonstrated.

Additional Information

Sponsor: Prof. Jessy Grizzle

Open to: Public