College of Engineering  |  Department of Electrical Engineering and Computer Science  |  ECE Division













Contact Information:
Prof. J. Kanicki
University of Michigan
EECS Department
2307 EECS Bldg.
1301 Beal Ave
Ann Arbor, MI 48109-2122

Tel: (734) 936-0964 (Office)
Tel: (734) 936-0972 (Lab)
Fax: (734) 615-2843
Email: Kanicki@eecs.umich.edu

Shipping Info: Click Here


Research Index

Active Matrix a-Si:H Thin Film Transistors Back Plane with Light Shield Structure for Imager Application

Gwanghyeon Baek, Geonwook Yoo and Jerzy Kanicki


For high resolution imager application, photo-diode (PD) is proposed to be integrated on the top of a-Si:H TFT active matrix backplane. With this structure, fill factor of 80%, pixel pitch of 50x5 5µm2 and critical dimension of 5µm could be achieved. However, the light which is not absorbed by active region of photodiode penetrates into channel area of a-Si:H TFT and induces high leakage current. Consequently, photo-current generated by the PD smaller than Ioff vanishes and dynamic range of imager decreases. Before depositing a pixel electrode layer, metal layer of 200 nm thickness was sputtered and another layer of passivation was inserted between light shield and electrode layer. By implementing this light shield structure, light induced leakage current is successfully suppressed as shown in the figure below; (left) without and (right) with light shield structure. This work is supported by the DARPA/MTO HARDI program.

 

top

Copyright © 2006 The Kanicki Laboratory | Site design: Academic Web Pages