Journal Publications
| 2009 | |
73 |
M. Richardson, Y.B. Gianchandani, “Wireless Monitoring of Workpiece Material Transitions and Debris Accumulation in Micro-Electro-Discharge Machining,” IEEE/ASME J. Microelectromechanical Systems, accepted for publication, Oct. 2009 |
72 |
A. Basu, Y.B. Gianchandani, “Scanning Probe Thermochemical Patterning in the Context of Nano Scale Lithography,” Nature Nanotechnology, News and Views (invited article), vol. 4 pp. 622-623, doi:10.1038/nnano.2009.287, October 2009 |
71 |
S. Wright, Y.B. Gianchandani, “Contaminant Gas Removal Using Thin-Film Ti Electrode Microdischarges,” Applied Physics Letters, 95(11), article 11504, pp. 1-3, Sept. 16, 2009 |
70 |
Y.B. Gianchandani, S. Wright, C. Eun, C. Wilson, B. Mitra, “Exploring Microdischarges for Portable Sensing Applications,” Analytical and Bioanalytical Chemistry (ABC) Journal, (invited paper), DOI 10.1007/s00216-009-3011-6, vol. 395(3), pp. 559-575, Sept. 2009 |
69 |
J.M. Park, A.T. Evans, K. Rasmussen, T.R. Brosten, G.F. Nellis, S.A. Klein, and Y.B. Gianchandani, “A Microvalve with Integrated Sensors and Customizable Normal State for Low Temperature Operation,” IEEE/ASME J. Microelectromechanical Systems, 18(4), pp. 868-879, August 2009 |
68 |
A. Basu and Y.B. Gianchandani, “A Programmable Array for Contact-Free Manipulation of Floating Droplets on Featureless Substrates by the Modulation of Surface Tension,” IEEE/ASME J. Microelectromechanical Systems, in press, July 2009 |
67 |
S. Wright and Y.B. Gianchandani, "Discharge-Based Pressure Sensors for High Temperature Applications Using Three-Dimensional and Planar Microstructures," Journal of Microelectromechanical Systems, 18(3), pp. 736-743, June 2009 |
66 |
T. Li, A. Barnett, K.L. Rogers, and Y.B. Gianchandani, “A Blood Sampling Microsystem for Pharmacokinetic Applications: Design, Fabrication, and Initial Results,” Lab-on-a-Chip, in press, May 2009 |
65 |
W. Zhu, M.J. White, G.F. Nellis, S.A. Klein, Y.B. Gianchandani, “A Si/Glass Bulk Micromachined Cryogenic Heat Exchanger for High Heat Loads: Fabrication, Test and Application Results,” IEEE/ASME J. Microelectromechanical Systems, in press, Apr. 2009 |
64 |
S.R. Green and Y.B. Gianchandani, “Wireless Magnetoelastic Monitoring of Biliary Stents,” IEEE/ASME J. Microelectromechanical Systems, vol. 18, no. 1, pp. 64-78, February 2009 |
63 |
M.J. White, G.F. Nellis, S.A. Klein, W. Zhu, Y. Gianchandani, “An Experimentally Validated Numerical Modeling Technique for Perforated Plate Heat Exchangers,” Journal of Heat Transfer, in press, Feb. 2, 2009 |
| 2008 | |
62 |
W.F. Weitzel, C.L. Cotant, Z. Wen, R. Biswas, P. Patel, H. Panduranga, Y.B. Gianchandani, J.M. Rubin, “Analysis of Novel Geometry-independent Method for Dialysis Access Pressure-flow Monitoring,” Theoretical Biology and Medical Modelling, 5:22, (12 pp.), Nov. 2008 |
61 |
N.K. Gupta and Y.B. Gianchandani, “Thermal Transpiration in Zeolites: A Mechanism for Motionless Gas Pumps,” Applied Physics Letters, 93, pp. 193511, Oct. 2008 |
60 |
A. Basu and Y.B. Gianchandani, “Virtual Microfluidic Traps, Filters, Channels, and Pumps using Marangoni Flows,” IOPJournal for Micromechanics and Microengineering, 18 (2008) 115031(11 pp.), available online Oct. 22, 2008 |
59 |
C.K. Eun, C. Wilson, Y.B. Gianchandani, "A Bulk Silicon Micromachined Structure for Gas Microdischarge-Based Detection of Beta-Particles," IOP Journal for Micromechanics and Microengineering, 18, (2008) 095007 (10 pp.), available online July 25, 2008 |
58 |
K. Takahata and Y. B. Gianchandani, "A Micromachined Capacitive Pressure Sensor Using a Cavity-Less Structure with Bulk-Metal/Elastomer Layers and its Wireless Telemetry Application," Sensors, 8, pp. 2317-2330, published on-line at www.mdpi.org/sensors, April 2, 2008, ISSN 1424-8220 |
57 |
B. Mitra, B. Levey, and Y.B. Gianchandani, "Hybrid Arc/Glow Microdischarges at Atmospheric Pressure and Their Use in Portable Systems for Liquid and Gas Sensing," IEEE Transactions on Plasma Science, vol.36, no. 4, pp. 1913-1924, August 2008 |
56 |
B. Mitra and Y.B. Gianchandani, "The Detection of Chemical Vapors in Air Using Optical Emission Spectroscopy of Pulsed Microdischarges from Two and Three Electrode Microstructures," IEEE Sensors, vol. 8, no. 8, pp. 1445-1454, August 2008 |
55 |
J.M. Park, R.P. Taylor, A.T. Evans, T.R. Brosten, G.F. Nellis, S.A. Klein, J.R. Feller, L. Salerno, and Y.B. Gianchandani, "A Piezoelectric Microvalve for Cryogenic Applications," IOP Journal for Micromechanics and Microengineering, vol. 18, no. 1, pp. 015023, January 2008 |
54 |
M.T. Richardson and Y.B. Gianchandani, "Achieving Precision in High Density Batch Mode Micro-Electro-Discharge Machining," IOP Journal for Micromechanics and Microengineering, vol. 18, no. 1, 015002 (12 pp.), January 2008 |
| 2007 | |
53 |
T.R. Brosten, J.M. Park, A.T. Evans, K. Rasmussen, G.F. Nellis, S.A. Klein, J.R. Feller, L. Salerno, and Y.B. Gianchandani, "A Numerical Flow Model and Experimental Results of a Cryogenic Microvalve for Distributed Cooling Applications," Cryogenics, vol. 47, issues 9-10, pp. 501-9, September-October 2007 |
52 |
S.A. Wright and Y.B. Gianchandani, “Controlling pressure in microsystem packages by on-chip microdischarges between thin-film titanium electrodes,” Journal of Vacuum Science and Technology B (Microelectronics and Nanometer Structures), 25(5), pp. 1711-1720, Sept. 2007. |
51 |
C.G. Wilson and Y.B. Gianchandani, "Selective Deposition of Silicon at Room Temperature Using DC Microplasmas," IEEE Transactions on Plasma Science, vol. 35, no. 3, pp. 573-577, June 2007 |
50 |
A. Basu, Y.B. Gianchandani, “Shaping High-Speed Marangoni Flow in Liquid Films By Microscale Perturbations in Surface Temperature,” Applied Physics Letters, 90, 034102, 2007 |
49 |
T. Li, R.Y. Gianchandani and Y.B. Gianchandani, “Micromachined Bulk PZT Tissue Contrast Sensor for Fine Needle Aspiration Biopsy,” Lab-on-a-Chip (IOP), 7, pp. 179-185, February 2007 |
| 2006 | |
48 |
K. Udeshi, K.-H. Liao, L. Que, Y.B. Gianchandani, and A. Galvanauskas, “Programmable Optical Wave form Shaping on a Microchip,” Applied Physics Letters, 89(3), pp. 31120 -1-3, July 17, 2006. (This paper was also selected for the August 7, 2006 issue of Virtual Journal of Nanoscale Science & Technology. The Virtual Journal, which is published by the American Institute of Physics and the American Physical Society in cooperation with numerous other societies and publishers, is an edited compilation of links to articles from participating publishers, covering a focused area of frontier research. Available at http://www.vjnano.org.) |
47 |
K. Takahata and Y.B. Gianchandani, K.D. Wise, “Micromachined Antenna Stents and Cuffs for Monitoring Intraluminal Pressure and Flow,” IEEE/ASME J. Microelectromechanical Systems, 15(5), pp. 1289-1298, October 2006 |
46 |
A. Gaitas and Y.B. Gianchandani, “An Experimental Study of the Contact Mode AFM Scanning capability of Polyimide Cantilever Probes,” Ultramicroscopy (Elsevier), 106, pp. 874-880, July 2006 |
45 |
T. Li and Y.B. Gianchandani, “A Micromachining Process for Die-Scale Pattern Transfer in Ceramics and its Application to Bulk Piezoelectric Actuators,” IEEE/ASME Journal of Microelectromechanical Systems, 15(3), pp. 605-612, June 2006 |
44 |
L.L. Chu, L. Que, A.D. Oliver, and Y.B. Gianchandani, “Lifetime Studies of Electrothermal Bent-Beam Actuators in Single-Crystal Silicon and Polysilicon,” IEEE/ASME Journal of Microelectromechanical Systems, 15(3), pp. 498-506, June 2006 |
43 |
Y. Shimamura, K. Udeshi, L. Que, J. Park, and Y.B. Gianchandani, “Impact behavior and Energy Transfer Efficiency of Pulse-Driven Bent-Beam Electrothermal Actuators,” IEEE/ASME Journal of Microelectromechanical Systems, 15(1), pp. 101-110, February 2006 |
42 |
B. Mitra, C.G. Wilson, L. Que, P. Selvaganapathy and Y.B. Gianchandani, “Microfluidic Discharge-Based Optical Sources for Detection of Biochemicals,” Lab-on-a-Chip (IOP), 6(1), pp. 60-65, 2006 |
| 2005 | |
41 |
L.L. Chu, K. Takahata, P. Selvaganapathy, Y.B. Gianchandani, and J.L. Shohet, “A Micromachined Kelvin Probe with Integrated Actuator for Microfluidic and Solid-State Applications,” IEEE/ASME Journal of Microelectromechanical Systems, 14(4), pp. 691-698, August 2005 |
40 |
S. McNamara and Y.B. Gianchandani, “On-Chip Vacuum Generated by a Micromachined Knudsen Pump,” IEEE/ASME Journal of Microelectromechanical Systems, 14(4), pp. 741-746, August 2005 |
39 |
L. Que, C.G. Wilson, Y.B. Gianchandani, “Microfluidic Electrodischarge Devices with Integrated Dispersion Optics for Spectral Analysis of Water Impurities,” IEEE/ASME Journal of Microelectromechanical Systems, 14(2), pp. 185-191, April 2005 |
38 |
J.-H. Lee and Y.B. Gianchandani, “A Temperature Dithering Closed-Loop Interface Circuit for a Scanning Thermal Microscopy System,” IEEE/ASME Journal of Microelectromechanical Systems, IEEE/ASME Journal of Microelectromechanical Systems, 14(1), pp. 44-53, Feb. 2005 |
37 |
S. McNamara, A. Basu, J.-H. Lee, and Y.B. Gianchandani, “Ultracompliant Thermal Probe Array for Scanning Non-Planar Surfaces Without Force Feedback,” IoP Journal of Micromechanics and Microengineering. Published electronically: 29 Oct, 04; in print form: 15(1) pp. 237-243, Jan 2005 |
| 2004 | |
36 |
K. Takahata and Y.B. Gianchandani, “A Planar Approach for Manufacturing Cardiac Stents: Design, Fabrication and Mechanical Evaluation,”IEEE/ASME Journal of Microelectromechanical Systems, 13(6), pp. 933-939, Dec. 2004 |
35 |
M.E. Zorn, C.G. Wilson, Y.B. Gianchandani, and M.A. Anderson, “Detection of Aqueous Metals Using a Microglow Discharge Atomic Emission Sensor,” Sensors Letters, vol. 2, no. 3,4, pp. 179-185, Sept.-Dec. 2004 |
34 |
A. Basu, S. McNamara, and Y.B. Gianchandani, “Scanning Thermal Lithography: Maskless, Submicron Thermo-Chemical Patterning of Photoresist by Ultracompliant Probes,” Journal of Vacuum Science and Technology B: Microelectronics and Nanostructures, 22(6) pp. 3217-3220,November 2004. (This paper was also selected for the December 27, 2004 issue of Virtual Journal of Nanoscale Science & Technology. The Virtual Journal, which is published by the American Institute of Physics and the American Physical Society in cooperation with numerous other societies and publishers, is an edited compilation of links to articles from participating publishers, covering a focused area of frontier research. Available at http://www.vjnano.org.) |
33 |
J.-H. Lee and Y.B. Gianchandani, “High-resolution Scanning Thermal Probe with Servocontrolled Interface Circuit for Microcalorimetry and Other Applications,” Review of Scientific Instruments, 75 (5), 1222-1227, May 2004 (This paper was also selected for the May 3, 2004 issue of Virtual Journal of Nanoscale Science & Technology. The Virtual Journal, which is published by the American Institute of Physics and the American Physical Society in cooperation with numerous other societies and publishers, is an edited compilation of links to articles from participating publishers, covering a focused area of frontier research. Available at http://www.vjnano.org.) |
32 |
S.P. McNamara and Y.B. Gianchandani, “LIGA Fabricated 19-Element Threshold Accelerometer Array,” Sensors and Actuators, A (Physical), 112(1), pp. 175-183, April 2004 |
31 |
C.G. Wilson and Y.B. Gianchandani, “Miniaturized Magnetic Nitrogen DC Microplasmas” IEEE Transactions on Plasma Science, 32(1), pp. 282-297, Feb. 2004 |
| 2003 | |
30 |
C.G. Wilson, Y.B. Gianchandani, and A.E. Wendt, “High Voltage Constraints for Vacuum Packaged Microstructures,” IEEE/ASME Journal of Microelectromechanical Systems, 12(6), pp. 835-9, Dec. 2003 |
29 |
Q. Luo, S. Mutlu, Y.B. Gianchandani, F. Svec, J.M.J. Fréchet, “Monolithic Valves for Microfluidic Chips Based on Thermoresponsive Polymer Gel,” Electrophoresis, 24, pp. 3694-3702, Nov. 2003 |
28 |
C.G. Wilson, Y.B. Gianchandani, R.R. Arslanbekov, V. Kolobov, and A.E. Wendt, “Profiling and Modeling of DC Nitrogen Microplasmas,” Journal of Applied Physics, 94(5), pp. 2845-2851, Sept. 2003 |
27 |
K. Thompson, J.H. Booske, R.F. Cooper, and Y.B. Gianchandani, “Electromagnetic Fast Firing for Ultrashallow Junction Formation,” IEEE Transactions on Semiconductor Manufacturing, 16(3), pp. 460-468, August 2003 |
26 |
A.D. Oliver, S.R. Vigil, and Y.B. Gianchandani, “Photothermal Surface-Micromachined Actuators,” Brief Communication, IEEE Transactions on Electron Devices, 50(4), pp. 1156-1157, April 2003 |
25 |
M.-H. Li and Y.B. Gianchandani, “Applications of a Low Contact Force Polyimide Shank Bolometer Probe for Chemical and Biological Diagnostics,” Sensors and Actuators, A (Physical), 104, pp. 236-245, April 2003 |
24 |
J.-S. Park and Y.B. Gianchandani, “A Servo-Controlled Capacitive Pressure Sensor Using a Capped-Cylinder Structure Microfabricated by a Three-Mask Process,” IEEE/ASME Journal of Microelectromechanical Systems, 12(2), pp. 209-220, April 2003 |
23 |
L.L. Chu and Y.B. Gianchandani, “A Micromachined 2D Positioner with Electrothermal Actuation and Sub-Nanometer Capacitive Sensing,” IOPJournal for Micromechanics and Microengineering, 13(2), pp. 279-285, March 2003 |
| 2002 | |
22 |
K.J. Ma, Y.B. Gianchandani, and K. Najafi, “The Active Dissolved Wafer Process (ADWP) for Integrating Single Crystal Si MEMS With CMOS Circuits, Journal of Semiconductor Technology and Science, 2(4), pp. 273-9, Dec. 2002 |
21 |
C.G. Wilson and Y.B. Gianchandani, “Spectral Detection of Metal Contaminants in Water Using an On-Chip Microglow Discharge,” IEEE Transactions on Electron Devices, 49(12) pp. 2317-22, Dec. 2002 |
20 |
L.L. Chu, L. Que, and Y.B. Gianchandani, “Measurements of Material Properties Using Differential Capacitive Strain Sensors,” IEEE/ASME Journal of Microelectromechanical Systems, 11(5), pp. 489-498, October 2002 |
19 |
K. Thompson, Y.B. Gianchandani, J. Booske, and R. Cooper, “Direct Si-Si Bonding by Electromagnetic Induction Heating,” IEEE/ASME Journal of Microelectromechanical Systems, 11(4), pp. 285-292, August 2002 |
18 |
K. Takahata and Y.B. Gianchandani, “Batch Mode Micro-Electro-Discharge Machining” IEEE/ASME Journal of Microelectromechanical Systems, 11(2), pp. 102-110, April 2002 |
17 |
L.L. Chu, J.A. Hetrick, and Y.B. Gianchandani, “High amplification compliant microtransmissions for rectilinear electrothermal actuators,” Sensors and Actuators, A (Physical), vol. A 97-98, pp. 776-783, April 2002 |
16 |
K. Thompson, J. Booske, Y.B. Gianchandani, and R. Cooper, “Electromagnetic annealing for the 100 nm technology node,” IEEE Electron Device Letters, 23(3), pp. 127-129, March 2002 |
| 2001 | |
15 |
J.-S. Park, L.L. Chu, A.D. Oliver, and Y.B. Gianchandani, “Bent-Beam Electrothermal Actuators – Part II: Linear and Rotary Microengines,” IEEE/ASME Journal of Microelectromechanical Systems, 10(2), pp. 255-262, June 2001 |
14 |
L. Que, J.-S. Park and Y.B. Gianchandani, “Bent-Beam Electrothermal Actuators – Part I: Single Beam and Cascaded Devices,” IEEE/ASME Journal of Microelectromechanical Systems, 10(2), pp. 247-254, June 2001 |
13 |
C.G. Wilson and Y.B. Gianchandani, “Silicon Micromachining Using In-Situ DC MicroPlasmas,” IEEE/ASME Journal of Microelectromechanical Systems, 10(1), pp. 50-54, March 2001 |
12 |
M.-H. Li, J.J. Wu, and Y.B. Gianchandani, “Surface Micromachined Polyimide Scanning Thermocouple Probes,” IEEE/ASME Journal of Micro-electromechanical Systems, 10(1), pp. 3-9, March 2001 |
| 2000 | |
11 |
L. Que and Y.B. Gianchandani, “Mechanical Properties and Pattern Collapse of Chemically Amplified Photoresists,” Journal of Vacuum Science and Technology B: Microelectronics and Nanostructures, 18(6), pp. 3450-2, Nov./Dec. 2000 |
10 |
M.-H. Li and Y.B. Gianchandani, “Microcalorimetry Applications of a Surface Micromachined Bolometer-type Thermal Probe,” Journal of Vacuum Science and Technology B: Microelectronics and Nanostructures, 18(6), pp. 3600-3, Nov./Dec. 2000 |
9 |
J.-S. Park and Y.B. Gianchandani, “A Capacitive Absolute-pressure Sensor with External Pick-off Electrodes” IOPJournal for Micromechanics and Microengineering, 10(4), pp. 528-533, Dec. 2000 |
8 |
Y. Gianchandani, H. Kim, M Shinn, B. Ha, B. Lee, K. Najafi, and C. Song, “A Fabrication Process for Integrating Polysilicon Microstructures with Post-Processed CMOS Circuits,” IOPJournal for Micromechanics and Microengineering, 10(3), pp. 380-386, Sept. 2000 |
| 1999 and Earlier | |
7 |
L. Que, Y. Gianchandani, and F. Cerrina, "Mechanical Characterization of E-Beam Resist Using Micromachined Structures," Journal of Vacuum Science and Technology B: Microelectronics and Nanostructures, 17(6), Nov/Dec, 1999, pp. 2719-22 |
6 |
Y. Gianchandani and S. Crary, "Parametric Modeling of a Microaccelerometer: Comparing I- and D-Optimal Design of Experiments for Finite Element Analysis," IEEE/ASME Journal of Microelectromechanical Systems, vol. 7, no. 2, pp. 274-282, June 1998 |
5 |
Y. Gianchandani, M. Shinn, and K. Najafi, "Impact of High Thermal Budget Anneals on Polysilicon as a Micromechanical Material," IEEE/ASME Journal of Microelectromechanical Systems, vol. 7, no. 1, pp. 102-105, March 1998 |
4 |
Y. Gianchandani and K. Najafi, " A Silicon Micromachined Scanning Thermal Profiler with Integrated Elements for Sensing and Actuation," IEEE Transactions on Electron Devices, 44 (11), Nov. 1997, pp. 1857-68 |
3 |
Y. Gianchandani and K. Najafi, "Bent-Beam Strain Sensors," IEEE/ASME Journal of Microelectromechanical Systems, vol. 5, no. 1, pp. 52-58, March 1996 |
2 |
Y. Gianchandani and K. Najafi, "Batch Assembled Multi-Level Micromachined Mechanisms from Bulk Silicon," IOPJournal for Micromechanics and Microengineering, vol. 2, pp. 80-85, 1992 |
1 |
Y. Gianchandani and K. Najafi, "A Bulk Silicon Dissolved Wafer Process for Microelectromechanical Devices," IEEE/ASME Journal of Microelectromechanical Systems, vol. 1, no. 2, pp. 77-85, June 1992 |